MIXC Raised Garden Bed on Legs, 48 Inch

MIXC’s raised garden bed pairs untreated fir wood with a Pinus radiata support frame, rated to hold 331 pounds of soil. Standing 31 inches tall on its own legs, it offers about 5 to 6 cubic feet of growing space at a 9 inch depth, with drainage holes and a liner included.

The listing describes fir wood for the main bed, chosen over cedar for resistance to warping and splitting, with Pinus radiata used in the load bearing supports. Rather than dovetail joints, the frame relies on a column and beam structure, said to raise the weight capacity to 331 pounds of soil and plants. The legs carry a waterproof coating meant to fend off rot, with an outdoor service life of up to three years quoted for the frame as a whole.

Four drainage holes are built into the base, and a waterproof PE liner ships with the bed. Since the liner blocks water on its own, the listing notes that anyone wanting drainage after filling with soil should puncture the liner over each hole with a sharp tool once the bed is loaded.

At 31 inches high, the bed is meant to be tended without kneeling or bending, and the elevation is also pitched as a deterrent to ground pests and small animals. Assembly is listed at 20 to 35 minutes with two people, using the included screwdriver and guide, with gloves suggested throughout. This 48 by 24.4 by 31 inch version sits at the smaller end of the range, alongside 72 inch and 96 inch long models.